Valentine v1.0.1
21.5 MB
An open source compressor meant to pump and breathe
Valentine is a compressor and distortion processor. It was inspired by the hyper compressed and crushed textures in the seminal Justice record, †. Using it is easy: turning input up makes the signal louder, more compressed, and more saturated. Turning crush up adds digital distortion.
The real fun is in processing signal with some ambience, be it a room or a reverb. With the right input gain and release settings, you can introduce pumping and breathing artifacts.
Though designed for aggressive (over) application, Valentine is flexible enough to use in a wide variety of applications. Try it today!
Using Valentine
Signal Path
Valentine is a non-linear processor. As such, knowing the signal path makes it easier to get your desired result. Here it is:
Crush -> Compress -> Saturate -> Soft Clip -> Output -> Mix
Parameters
Crush: increases the amount of bit crushing. Downsamples the signal to 27.5kHz. Enabled using the Crush button.
Compress: sets the gain applied to signal before compression. Use this to increase the amount of compression and distortion affecting the signal.
Saturate: sets the amount of gain applied to signal before Valentine’s waveshaper. Gain is compensated to prevent huge volume boost when you just want more dirt. Enabled using the Crush Enable Button.
Ratio: sets the compression ratio. “Infinity” is more like 1000:1. Increasing this also increases threshold and decreases knee.
Attack: sets compression attack time.
Release: sets compression release time.
Output: sets wet signal output gain before mix. Output clipping can be enabled with the Clip button.
Mix: increases the amount of wet signal in the processor’s output.
Bypass: bypasses all processing.
https://github.com/tote-bag-labs/valentine
valentine-1.0.1 ( 21 MB )
