VST Effects

ViatorDSP – Electron EQ

Electron EQ

size 12 MB  / 14 MB

Electron EQ is a tube equalizer inspired by popular EQ’s that have been in top studios for decades.

This bad boy is full of cool features, like 4x oversampling, mid/side processing, and meticulous tube-overdrive circuit emulation.

  • Low Boost – Low shelf filter of original design controlled by the “freq” dial near it from 22 Hz to 300 Hz by 0 dB to +10 dB.
  • Low Atten – Low cut filter just above the Low Boost filter. It helps define and fatten the low-end, by 0 dB to -10 dB.
  • High Boost – High shelf filter of original design controlled by the “freq” dial near it from 1000 Hz to 16000 Hz by 0 dB to +10 dB.
  • High Atten – High cut filter just above the High Boost filter. It helps define and round off the high-end, by 0 dB to -10 dB.
  • Bandwidth – Controls the “Q” factor, or bandwidth of the low and high filters, 0 being the most narrow and +10 being the widest.
  • LP – Low-pass filter from 20000 Hz to 3000 Hz.
  • Drive – Controls the drive parameter for a meticulously modeled tube circuit with parallel processing to subtly dial in tube saturation. When the drive slider is at 0 dB, the processing turns off to save CPU usage when the effect is not desired.
  • Trim – Output volume control.
  • EQ In/Out – Toggles the EQ processing on or off without resetting the current state of the filter’s boost and atten settings.
  • OS – Toggles 4x oversampling on or off. Toggling oversampling on will set the LP filter to 19000 Hz if it is currently set to 20000 Hz. This takes care of some sampling rate math and lets you hear the high end difference. It would be best to leave the LP filter lower than 19000 while oversampling is on.
  • Stereo Mode – This allows you to choose between mid/side/left/right/stereo processing. Use this to remove low end from the sides or add brightness to the sides, whatever cool mid/side/left/right/stereo processing you like to do! This effect will of course perform the best on a stereo source.
  • Setting a filter to 0 dB will turn off processing to save CPU for unused filters.
  • The plugin will save it’s window size when you hit save in your DAW and it will recall the size on the next startup.

https://www.patreon.com/ViatorDSP

download win 64download win 64 download audio unitdownload audio unit download free vstdownload free vst

ElectronEQ_VST3  ( 12 MB )

ElectronEQ-MacInstaller  ( 14 MB )

AddThis Website Tools

Recent Posts

Love-Fi 4 Lite v4.0.0 WiN MAC

Love-Fi 4 Lite  692 MB Introducing Love-Fi 4 Lite—the ultimate tool for effortlessly creating LoFi, ChillWave, Chillhop, and Lo-Fi Ambient…

YS Distance Easy v1.0.0 WiN Mac

Distance Easy 33 MB YS - Distance Easy Audio plugin for getting a simple effect of sound source distance. The…

VoMPE v1.0.0 WiN

VoMPE 2 MB VoMPE (Voice over MIDI Polyphonic Expression) analyzes voice input and then outputs polyphonic MIDI notes based on formant…

Gamelanizer v1.1.0 WiN Mac

Gamelanizer 33 MB Accompanying material for the paper 'A Real-Time Audio Effect Plug-In Inspired by the Processes of Traditional Indonesian…

CloudReverb v0.2 WiN Mac Linux

CloudReverb 15 MB algorithmic reverb plugin based on CloudSeed This is an audio plugin for algorithmic reverb. The algorithm is…

YS Mix Strip v1.0.0 WiN Mac

YS Mix Strip 86 MB YS - Mix Strip_Channels_ Audio plugin for mixing. The plugin has a wide range of…