SEGX2 v1.0

SEGX2

size 0.47 MB  /  0.50 MB

SEGX2 is a smooth dual band expander gate.

SEGX2 operates always with soft knee which starts at the threshold point. Signal above the threshold passes thru unaltered.

  • Independent release times for low and high frequency band.
  • Adjustable ratio.
  • Smooth, soft-knee operation.
  • Uses 6dB/oct crossover filters, which are gentle for phase response. Keeps phase response fully unaltered when gate is open.
  • The band link control glues the low and high band behavior together. At 100% the operation is similar to a regular wide band expander gate.
  • The monitor slider allows monitoring of the detector side chain, which can be used for checking the gated out signal.
  • The pre-gate option allows the gate open in advance. This control adds latency. When active, fast transients can pass thru unaltered, thus offering higher quality output.

http://sonic.supermaailma.net/

 

SEGX2-Gate ( 0.47 MB )

SEGX2-Gate_x64 ( 0.50 MB )

Tags: SEGX2

Recent Posts

WetEQ – British Console EQ

Tired of your in-the-box mixes sounding sterile, flat, and lifeless? We've all been there - you crank a high shelf…

Aether Stereo Exciter – Harmonic Saturator

Are your mixes sounding flat, dull, and thin no matter how hard you push your EQ? We’ve all been there,…

True Panner – 3D Stereo Imager

Tired of your mixes sounding two-dimensional and cluttered right down the middle? I found a fix that is going to…

Phantom Ghost Reverb – Transition FX

Tired of spending ten minutes chopping, bouncing, and realigning audio just to get a simple reverse swell? I found a…

Polarity-Recorder – Audio Capture

Tired of playing the most fire synth lead of your life, only to look over and realize your DAW wasn't…

Harmony Pro – Chord Assistant

Tired of laying down the same tired four-bar chord loop on every single track? We have all been there, staring…