Noisebud Filter v3.11
Noisebud Filter
size 3.25 MB
Noisebud filter consists of 4 filters.
They are switchable between:
- Lo pass
- hi pass
- band pass
- band reject filter
The signals from the four filters are wired in a parallel chain. Every filter can be controlled by three different LFO’s where one is tempo synced; one normal and one extremely slow (a sLoFO). The LFO sections also have something we call VariFO. It adds another movement to the LFO and makes it less predictable. Every filter has an invert button so that you can silence frequencies that collide during heavy LFO movements, this and the VariFO is probably what make Noisebud filter in somewhat special.
Noisebud_Filter_3.11_Setup ( 3.25 MB )
Recent Posts
YS Filters Easy v1.0 WiN Mac
Yo, what's good fam! It’s your boy, back at it again with another gem for the hard drive. Let’s talk…
Bark Of Dog 3 (Low-Frequency Enhancer) v3.0.1 WiN MAC
Yo beatmakers and mix engineers! What's good? Let's keep it 100 for a second—there is nothing worse than spending hours…
LS 1176 PURLE (1176 Compressor ) WiN Mac
Yo engineers and beatmakers! What's good? We've all been there - you're staring at your DAW, the beat is cool,…
Hammer And Meißel v1.0 WiN Mac Linux
Yo, what’s popping, creatives? It's your boy back in the lab, surfing the web so you don't have to. Let’s…
reTuner Free Pitch Shifter v1.0.0 WiN Mac
What’s cracking, engineers? Welcome back to the lab. It's your boy here, ready to drop some serious value on your…
Dynamension v1.0 – Creative Dynamic FX
Yo, what’s up producers! 🎧 We’ve all been there—it’s 3 AM, you’re deep in the zone, but your drums just…