Bit Fluzer v1.0

Bit Fluzer

size 0.81 MB  /  0.72 MB

Bit Fluzer is similar to a standard bit crusher but featuring two channels with input filters and audio bit reductions modulated by two LFOs.

Using the Bit Fluzer plugin you can alter the bit depth of the audio signal from your instruments or audio tracks in your DAW in various ways. The two bit depth controls range from one to 20 bits in continuous fashion, moreover the bit depth can be made to rhythmically oscillate with the LFOs.

That way you can obtain a range of mono or stereo modulating effects: from subtle “sound warming”, due to the soft noise introduced by a little bit depth reduction, to more aggressive distortions and groovy patterns. The two channels can work independently on different sections of the audio spectrum, since one channel features a lowpass filter and the other a highpass filter.

• Channel 1 features a Lowpass filter. Channel 2 features a Highpass filter.
• Both channels take the input as mono: left + right .
• You can create a new stereo image on the output using the pan controls.
• The LFOs when “free running” the rate range is 0.01 to 26.00 Hertz, when in “sync” the rate range is 1 bar to 1/32 (assuming a 4/4 time signature), and it will modulate the bit reductions relatively to the value of the bit depth controls.
• The level of the input can be adjusted between -12 and +12 dB.
• The dry/wet slider allows to mix the stereo input with the effected signals.
• All parameters can be automated inside a DAW.
• Scalable GUI and custom colours.

 

Bit_Fluzer  ( 0.81 MB )

Bit_Fluzer_x64 ( 0.72 MB )