ATKTransientShaper v1.0

ATKTransientShaper

size 0.96 MB  /  1.05 MB  /  0.47 MB  /  0.95 MB

ATK TransientShaper is a mono transient shaper with all the parameters usually hidden from the user.

• RMS is the size of the power power windows.
• Attack is the attack time constant for the slow attack/release filter.
• Attack fraction (or ratio) is the percentage of the attack time constant that will be used for the fast attack/release filter.
• Release is the release time constraint for the fast attack/release filter (as the release time has to be higher).
• Release fraction (or ratio) is the percentage of the release time constant that will be used for the slow attack/release filter (as it has a faster release time constant). Usually set to 100%.
• Threshold.
• Slope is the ratio, 1 being the identity, higher than 1 compressing the transient, less than 1 swelling it.
• Softness is an indicator of the harshness of the knee of the underlying compressor.
• Color is an indicator of the color around the threshold: positive increases the gain around it, negative decreases it.
• Quality is the amount of color.
• Make-up is the gain after the effect.
• Dry-wet gives the balance between the unprocessed signal and the processed signal.

https://github.com/AudioTK

ATKTransientShaper ( 0.96 MB )

ATKTransientShaper_x64 ( 1.05 MB )

ATKTransientShaper.component  ( 0.47 MB )

ATKTransientShaper ( 0.95 MB )