The GUI is divided into three sections: On the top left there are basic controls for input/output levels and the stereo expander. The bottom left controls set the level of all channels. The four horizontal strips on the right are the four effect channels. The effects applied to each channel are mixed in the final output.

input - Adjusts the input level. dryout - Adjust the output level of the dry signal. expstereo (button) Turns the stereo expander on/off. (knob) Adjusts the wideness of the stereo expander. Has no effect if the mixer pan control is set to a low value.

cut-off - Sets the cut-off value for all filters. resonance - Sets the resonance value for all filters. feedback - Sets the feedback value for all delays. mix - Adjusts the mix for all delay levels.

	Turns the channel on/off. Reduce the number of channels to ease the load on a slow CPU.
	Filtertype - Selects the filter type from LPF (low pass filter), HPF (high pass filter) or BPF (band pass filter).
	waveform - Selects the waveform of the filter affecting the channel. Pulse width is fixed at 50%.
	speed - Sets the speed of the LFO.
	amount - Sets the depth of the LFO.
	Delaytime - Sets the delay time of the channel.
	Delay Volume - Adjusts the delay volume of this channel only.
	PAN - Sets the pan position of the output.
	Volume - Sets the volume of the channel.

Copyright and disclaimer

Waterfall is freeware. The author shall not be liable for any damages arising from the use if this. Please use at your own risk.

Waterfall is made with SynthEdit