25 MB

The Commodore Amiga revolutionized the home computer when it hit the shelves in 1985. Not only sporting colourful 16-bit graphics but also boasting four channels of 8-bit sampled audio. With sample sequencing software like ProTracker and OctaMED, it was the first computer that allowed its users to record and sequence instruments into a full song; inspiring musicians, programmers, graphic designers, and hackers to show what they could really do with the new technology that the Amiga gave them. And while its specs may seem like they pale in comparison to more modern computers, its sound and legacy continue to inspire people to this day.

The Commodore Amiga revolutionized the home computer when it hit the shelves in 1985. Not only sporting colourful 16-bit graphics but also boasting four channels of 8-bit sampled audio. With sample sequencing software like ProTracker and OctaMED, it was the first computer that allowed its users to record and sequence instruments into a full song; inspiring musicians, programmers, graphic designers, and hackers to show what they could really do with the new technology that the Amiga gave them. And while its specs may seem like they pale in comparison to more modern computers, its sound and legacy continue to inspire people to this day.

The Ami Sampler brings that feel and that sound into the modern world of Digital Audio Workstations. Obviously heavily inspired by the Amiga, as well as Protracker and Fasttracker, it also draws inspiration from last trackers like Triton’s Fasttracker II and Milkytracker in addition to some modern sampler VST plugins. While in no way an emulator nor a recreation of the limitations that the late 80s software had, the Ami Sampler strives to take the classic sound of the Amiga but still allow it to stand up with a modern DAW setting.

Controls / Parameters
For the most part, the Ami Sampler has pretty standard controls that one would expect to find in a sampler VST. There are twelve individual samplers. Each sampler has its own volume, pan, and ADSR controls as well as solo/mute. There’s also the option for each channel to be monophonic, four-voice polyphonic (PT poly), or eight-voice polyphonic (Octa poly). There’s also a sample rate decimator control and when the channel is in monophonic mode, there’s a control for pitch glide.

Master output has controls for master volume, master pan, a switch to enable a 4.4khz 6db/octave low pass filter (modeled after the RC filter in the Amiga 500), a switch to enable a 3.1khz 12db/octave low pass filter (modeled after the LED filter in the Amiga 500 and Amiga 1200), and vibrato speed and depth.

By far my favorite control that I put into the Ami Sampler is the “Paula” switch, taking inspiration from the Amiga’s audio processor’s (known as Paula) limitation to only be able to pan hard left or hard right. This limitation in the Amiga could allow the user to create uniquely wide sounding pads when multiple channels play the same sample as a chord.

The Paula switch creates a similar affect by alternating the pan for each note played by the sample; almost like an autopan except the notes are sustained instead of shifting back and forth. When in “Paula” mode, the channel pan control becomes a stereo width from -100 wide to +100 wide (when in Mono mode, “Paula” is disabled since the effect is for chords).

Other controls include a computer-key virtual midi keyboard mapped to Protracker’s/Fasttracke’s note map, plugin window scaling via the window buttons above the waveform graphic (window scaling is disable in Linux plugins as Linux DAWs don’t handle this feature well), sample looping, and MIDI channel/transposition controls.

Sample loading/saving
Sample loading can be done via the LOAD button or by dragging and dropping samples into Ami Sampler. Supported file formats include: .WAV, .AIF, 8SVX .IFF (Amiga audio file), 8-bit signed raw PCM, mu-law encoded .BIN (Linn drum and Drumulator samples), and .BRR files (Super Nintendo samples). While Ami Sampler does play back any audio at 8-bit PCM and does have a sample rate decimator available, to fully get the Amiga feel, it’s recommended to use 8-bit samples with a sample rate below 28khz (typical sample rates for the Amiga were usually either 8363hz or 16726hz).

A handleful of samples are included in this repository under the Samples folder. Included are the famous ST-01 and ST-02 sample packs converted to WAV, a random collection of some of my favorite samples in the remaining ST-XX sample packs (under ST-FV), and a handful of samples that I recorded on my Amiga 500 using my Arduinosound Turbo sampler module (https://github.com/astriiddev/Arduinosound-Turbo) under the folder ST-ASTRX. Some of the ST-ASTRX samples are in the original IFF format, some have been converted to BRR using my SBC700 Super BRR Converter program (still in development).

Additional Amiga samples from the ST-XX sample packs can be found at https://archive.org/details/AmigaSTXX

Sample saving is done with the SAVE button; currently only WAV, AIF, IFF, raw, and BIN are supported. You can also clear out a sample from its slot with the trashcan icon.

https://github.com/astriiddev/Ami-Sampler-VST

Ami_Sampler_v0.7.2  ( 25 MB )

VST

We’re audio producers and sound designers with over 20 years of experience in the industry. Our team has lived through the entire evolution of digital audio production.

Our mission? To filter out the junk and bring you only the studio-ready free VSTs that actually compete with paid gear. We do the digging so you can focus on creating.

freevstplugins.net

58 MB

Bit-Destruction of Sound
Astriid BitDOS is a bit-inverting industrial distortion plugin for Windows/MacOS/Linux with VST3/AU/LV2
An 8-bit distortion that will absolutely destroy whatever sound you run into it!

Click on any one of the 8 bits to invert it. Click it again and that bit will always be set to a hard zero no matter what is thrown into it.

The further left the bit, the louder and more intense the distortion. And by loud I mean LOUD.

Reset the bit back to normal mode by clicking it one more time after it’s set to “hard zero” mode.

(Hint: green is normal mode for that bit, amber is inverted mode, and red is hard zero mode)

Change input and output volume as well as wet/dry blend by clicking on the BitDOS logo. Change the mode from unsigned 8bits to signed 8bits by clicking the floppy drive.

(Hint: green floppy LED is unsigned mode, red is signed mode)

Perfect for industrial, EBM, harsh noise wall, or whatever genre where you just wanna destroy your sound!

https://github.com/astriiddev/BitDOS-VST

BitDOS  ( 58 MB )

VST

We’re audio producers and sound designers with over 20 years of experience in the industry. Our team has lived through the entire evolution of digital audio production.

Our mission? To filter out the junk and bring you only the studio-ready free VSTs that actually compete with paid gear. We do the digging so you can focus on creating.

freevstplugins.net